Hobbico Hadron Informations techniques télécharger pdf (Page 16)

PROTECT YOUR MODEL, YOURSELF & OTHERS...

FOLLOW THESE IMPORTANT SAFETY PRECAUTIONS

1. Your Hadron should not be considered a toy, but rather a sophisticated, working model that functions very much like a full-size

airplane. Because of its performance capabilities, the Hadron, if not assembled and operated correctly, could possibly cause

injury to yourself or spectators and damage to property.

2. You must assemble the Hadron according to the instructions. Do not alter or modify the model, as doing so may result in

an unsafe or unﬂ yable model. In a few cases the instructions may differ slightly from the photos. In those instances the written

instructions should be considered as correct.

3. You must use an R/C radio system that is in good condition. All components must be correctly installed so that the model

operates correctly on the ground and in the air. You must check the operation of the model and all components before every

ﬂ ight.

4. If you are not an experienced pilot or have not ﬂ own this type of model before, we recommend that you get the assistance of

an experienced pilot in your R/C club for your ﬁ rst ﬂ ights. If you’re not a member of a club, your local hobby shop has information

about clubs in your area whose membership includes experienced pilots.

5. While this kit has been ﬂ ight tested to exceed normal use, if the plane will be used for extremely high stress ﬂ ying, such as

racing, or if a motor or battery larger than ones in the recommended range is used, the modeler is responsible for taking steps

to reinforce the high stress points and/or substituting hardware more suitable for the increased stress.

We, as the kit manufacturer, provide you with a top quality, thoroughly tested kit and instructions, but ultimately the quality and

ﬂ yability of your ﬁ nished model depends on how you build it; therefore, we cannot in any way guarantee the performance of your

completed model, and no representations are expressed or implied as to the performance or safety of your completed model.

Motor Safety Precautions

Failure to follow these safety precautions may result in severe injury to yourself and others.

•

Wear safety glasses whenever running motors.

•

Keep your face and body as well as all spectators away from the plane of rotation of the turning propeller.

•

Keep loose clothing and objects such as pencils or screwdrivers that may fall out of shirt or jacket pockets away from the prop.

ACADEMY OF MODEL AERONAUTICS

If you are not already a member of the AMA, please join! The AMA is the governing body of model aviation and membership

provides liability insurance coverage, protects modelers’ rights and interests and is required to ﬂ y at most R/C sites.

Academy of Model Aeronautics

5151 East Memorial Drive

Muncie, IN 47302-9252

Tele. (800) 435-9262

Fax (765) 741-0057

modelaircraft.org

REPLACEMENT PARTS

Replacement parts may be purchased from your local hobby dealer or on-line. For assistance with defective or missing parts

or purchasing replacement parts, contact Flyzone Product Support at the contact information on the front cover of this manual.

FLZA6515 Wing & Fuselage Body

FLZA6516 Turtledeck

FLZA6517 Vertical Stabilizer

FLZA6518 Canopy

FLZA6519 Canopy Hook

FLZA6520 Nose Cone

FLZA6521 Vectoring Motor Mount

FLZA6522 Brushless 35-36-2200kV Motor

FLZA6523 40A ESC

FLZA6524 Metal Gear Vector Servo

FLZA6525 Servo

FLZA6526 Spinner Assembly

FLZA6527 5x5 Propeller (2)

FLZA6528 6x5 Propeller (2)

FLZA6529 Pushrod Set

FLZA6530 Plastic Skids

FLZA6531 Screw Set

1 2 ... 11 12 13 14 15 16

Commentaires sur ces manuels

Pas de commentaire

Hobbico Hadron Informations techniques Page 16

Commentaires sur ces manuels

Produits connexes et manuels pour Jouets télécommandés Hobbico Hadron